Wood is an organic living material that responds to different humidity and temperature changes. Therefore, the construction of parquet flooring is very important to ensure maximum stability and durability.
1Protective finish. 5 layers of UV hardened lacquer or 3 layers of UV hardened oil
2Top layer. 4mm Oak
3Backing layer. 6 | 10 | 11 mm water resistant birch plywood.
4Cross cutting from the bottom
* Other options are available
Using completely natural wood and the latest technology, Frevini produces only top-quality flooring – the perfect combination of both aesthetics and practicality. In order to ensure our production’s longevity, we cover all our floors with a special protective layer, turning the maintenance and cleaning of your flooring into the simplest and most pleasurable of your chores.
L A C Q U E R
The surface of the wood is covered with five lacquer layers to protect it from abrasion and stains. Maintaining and cleaning lacquered wooden floors couldn’t be easier. Lacquer-covered flooring is more resistant to liquid spills and dirt, making one simple motion of sweeping or wiping enough to get rid of any accumulated dirt.
Here are some tips on how you can take care of your lacquered floors:
U V O I L
The surface of the wood is covered with three layers of a special UV-cured oil coating. Oiled floors are less resistant to dirt than lacquered ones, spilled liquids get absorbed easier, so they need to be cleaned immediately. However, oiled floors are much easier to repair when they get damaged or dirty. Sunlight and UV rays affect the oxidation process of wood, making it age and change its colour quicker, and a special UV oil coating helps to slow down this process.
Here are some tips on how you can take care of your oiled floors:
Your guide to a different sizings of parquet flooring.
Your guide to a different grades of parquet flooring.
Regular color and texture;
Natural grain of wood;
Sound and pin knots up to 8 mm;
Small group knots up to 5 mm;
Max 10 % of outer sapwood allowed on the total amount, but not wider than 10 mm;
Minimal amount of Silver grains allowed;
Variety of colours and natural discolouration, natural grain of wood;
Sound and pin knots up to 20 mm;
Filled knots up to 20mm;
Group knots up to 10mm;
Max 15% of sapwood allowed on the total amount;
Silver grains allowed;
Variety of colours and natural discolouration, natural grain of wood;
Sound and pin knots up to 40 mm;
Filled knots up to 40 mm;
Group knots allowed;
Max 15 % of sapwood allowed on the total amount, but not greater than 15 % of single board area;
Silver grains allowed;
End cracks up to 80 mm;
Filled cracks allowed;
Discolouration no restrictions,
natural grain of wood;
Sound and pin knots unlimited;
Filled knots up to 60 mm;
Group knots allowed unlimited;
Max 25 % of sapwood allowed on the total amount, but not greater than 30 % of single board area;
Filled cracks allowed;
Silver grains allowed;